Lesson 6 of 8 · same for yew2K and yewFN
Switch to the script
One slot runs at a time. The OLED has to be on the slot you programmed, not the Cronus home screen. Same button for yew2K and yewFN.
PROG is unplugged. Controller in the left A1 port with a data cable. Console cable in the back CONSOLE port. PS5 still needs its bypass — that wiring is the PS5 guide. Xbox and PC are the Xbox and PC guides.
Tap the right blue button on the Zen to change slots. The PS5 guide uses that button to leave a script and reach the home screen. Keep tapping until the OLED shows the script you programmed, not the home / Gearhead screen.
If you programmed yew2K in slot 2 and yewFN in slot 3, the right blue button is how you move between them. The slot that is on the screen is the script that runs.
First time on a yew2K slot
The OLED shows the yew.gg lock screen. The script is in the slot, but it does not run until you enter the key. You only redo this if you program that slot again, update firmware, or hard reset.
Press Cross (PlayStation) or A (Xbox). Six letters appear.
On yew.gg, open Activate your Cronus Zen under the yew2K download, type the six letters, and tap Get key.
Press Cross / A again. D-pad up and down changes a digit, D-pad right moves to the next one. Enter the key and press Cross / A on the last digit.
The Zen flashes ACTIVATED and sits on the yew2K logo.